Installation
Sliding Gates
Cantilever and rolling gates for tight spaces, wide openings and frequent use.
Installation & repair
Automatic Gates and Gate Opener Services
Turn a manual gate into one that opens from the car, or get an existing opener working properly again. We help with operators, access control and the gate structure they depend on.
Call for a Quote(214) 214-7849
Every day, 8:00 AM–8:00 PM
An automatic gate is two systems working together: the gate itself and the operator that moves it. If either one is out of alignment, underbuilt or worn, the whole system suffers. Many opener problems turn out to be gate problems, and many new automation projects reveal that the existing gate needs reinforcing first.
We help homeowners and businesses add automation to new or existing gates, choose between operator types for swing or sliding gates, and set up access methods such as keypads, remote controls and intercoms.
For opener repair we look at the full picture: operator, wiring and power, safety sensors, and the gate hardware. For gate structure and hinge problems alone, see gate repair.
Automated gates involve moving mass, entrapment risks and safety devices. Project requirements, design coordination, safety considerations and applicable approvals are reviewed for the specific job.
Where it applies
Automatic Gates & Openers for homes and businesses
Residential and commercial applications
Residential
- Opening a driveway gate from inside the car
- Adding a keypad or remote to an existing gate
- Replacing a failed operator on an older gate
- Automating a gate that guests and deliveries use
Commercial
- Controlled vehicle access for staff and deliveries
- Keypads, card readers or intercom entry
- Gates on frequent daily cycles that need reliable operators
- Service on existing commercial gate systems
Why customers call
Why customers call about automatic gates
- Convenience
- Opening and closing a gate by hand in rain, heat or the dark gets old quickly. Automation fixes that.
- Better security
- A gate that closes automatically is more likely to actually be closed. Access control adds accountability.
- The opener has stopped working
- Failed boards, worn motors, dead batteries and damaged sensors all cause outages. Many can be diagnosed and repaired.
- Operator and gate are mismatched
- An operator too small for the gate wears out fast. A gate that binds overloads the motor. Both are fixable.
Design, materials and finish
Operator and access options
Swing gate operators
Articulating arm or underground designs that push or pull each leaf. Suited to residential and many commercial swing gates.
Slide gate operators
Chain or rack-driven motors for rolling and cantilever gates, sized to gate weight and use.
Access control
Keypads, remote transmitters, intercoms, keyed switches and vehicle detection loops.
Power and backup
Line voltage or solar power, and battery backup so the gate can operate or be released during a power outage.
Safety is part of the design
Automated gates can injure people and damage vehicles if safety is neglected. Photo-eye sensors, edge sensors, adjustable force limits and manual release methods are all part of a properly planned system. We review the safety devices appropriate to your gate type, traffic and location, rather than treating them as optional extras.
How the work goes
A realistic project process
Project process
Step 1
Discuss the gate and how it is used
Call to describe gate type, size, existing opener if any, and how you want to open it.
Step 2
Evaluate the gate and plan the system
We review the gate structure, power availability, operator type, access method and safety devices needed.
Step 3
Reinforce or repair as required
If the gate or posts need strengthening to carry an operator, that work is scoped first.
Step 4
Install, set up and test
The operator and access equipment are installed, limits and force are adjusted, and safety devices are tested.
Scope and pricing
What affects the scope and cost
Every project is different, so pricing depends on the details. These are the factors that shape the work.
- Swing or sliding gate type and weight
- Operator type and capacity
- Access-control and communication equipment
- Distance from power and trenching needs
- Safety devices and backup power
- Work required to prepare or reinforce the gate
Questions
Automatic Gates & Openers: common questions
Can you add an opener to my existing gate?
Often yes, if the gate is structurally sound and hangs well. We check the gate and posts first, since an operator will expose any weakness in them.
My opener stopped working. What should I check?
Check power, any battery and obvious obstructions. Beyond that, call and describe what happens: no sound, a hum, partial movement. That helps narrow the cause before anyone visits.
Will the gate work in a power outage?
That depends on the setup. Battery backup and manual release options can be included. Tell us how important outage operation is to you.
What access options are available?
Common options are remotes, keypads, intercoms, keyed switches and vehicle sensors. The right mix depends on who uses the gate.
Do automatic gates require approvals?
Requirements vary by property and jurisdiction, and safety considerations apply. We review these for each project rather than assuming a single standard.
Related services
Often discussed together
Related services
Installation
Driveway Gates
Swing or sliding gates sized to your driveway, with layout and material advice up front.
Repair
Gate Repair
Fixes for sagging, sticking and damaged gates, from hinges and posts to welded sections.
Installation & repair
Commercial Metalwork
Bollards, enclosures, handrails, security gates and welding repairs for commercial sites.
Arranging automatic gates & openers across DFW
Alpha Iron Work is based in Dallas and serves the whole metroplex. These service area pages offer more guidance for planning work in specific cities.
Discuss your automatic gates & openers project
Call to discuss the work, the location, approximate dimensions, materials and scheduling. We will tell you what the job involves and what to expect next.
Discuss Your Project(214) 214-7849
Every day, 8:00 AM–8:00 PM Central Time